Sealing Fan Connect Regulator

return

Hi friends

Well I think I saw too many holiday was good for study, but I see much neglected blog and well now I have more time and I start to publish many good things I have.

Well I started this for them about the ultrasonic circuit I made for a college course, good build and I take time but it did not have the necessary tools, but good in the end I came out so much effort.

The circuit is easy, take it out on a circuit that served something bigger for other things, well the circuit was made and it works fine as follows:






---- CLICK HERE DOWNLOAD THE CIRCUIT
Note: The server is 4Shared, so here to download the document have to wait a few seconds, it then appears a box in the center of the page and then give click where it says Download file .


Well this circuit has two parties and are the receiver and transmitter which are calibrated to 46Khz this is achieved with the 10K potentiometer which will be to regulate the frequency which we may say that if plaque builds are recommended:

1. The components are as close as possible
2. Make a good ground, this means that the lands have more bakelite. Well

other aspect is that the capsules are these:



The pairs are the Tx and Rx good in my beloved Peru are are S / 20.00 soles nose as exist in other countries, but the recommendation is good are the separation of two capsules is crucial because if they will see evidence when separated from each other The uptake is different. Well

beware because the protective Mallika are somewhat weak and good to me I broke a dish.

alcanse distance is 1.5 meters high but can be calibrated to a maximum 10 meters gets good this will do by adding one more stage to the circuit, but good for practical purposes and more for robotic 1.5 m is sufficient. Good friend

here gave them a brief explanation of this project that I take some time, and well here it is. Soon

publishes a circuit " SPEED CONTROL OF A DC MOTOR " WITH LCD, Jan ste circuit ples may see ups and downs in the LCD which gives the engine, for this I am using a PIC16F84A, also I have them there in the 16F877A, but as Confucianism would say "Do not try to kill a mosquito with a basuca."

A
I forgot, now check my 4shared account and I noticed with surprise that I deleted all the files I had, so some links which went up files do not work, but others if solucinare files up again and links in the next few days, a thousand apologies.

"SHARING INFORMATION TO GROW YOUR COUNTRY, YOUR KNOWLEDGE AND MAKE NEW FRIENDS"

Sample Destination Wedding Thank You

The WiTricity

Hi friends

Returning time, something busy and lack good q Internet sesion I made a post prevented me new things, but tim that and here I informed of something new.

Ing and researchers from MIT ( Massachusetts Institute of Technology), a year ago proposed to realize wireless power using electromagnetic waves volatile harmless. These waves are produced today by the antennae of wireless communications, but quickly fade away from its generating source.




And that came to define and managed to light a 60W bulb at 2 meters away, this with the help of two shaped copper antennas esperiral, like a coil and a half meter.
This has been due to studies reliza on transmitting electric power in the communications antennas and dissipating.

The scientists achieved this hasan and named it "Witricity" or "WiTricity" from "WIFI" and electricity.

The "trick" is that both coils of copper are "coupled" and specially designed to "resonate" with the magnetic field, inside which there is a strong interaction between the transmitter and receiver unit. Outside the magnetic field in the surrounding environment, everything is be the norm.

two coupled resonant objects, ie, that vibrate at the same frequency tend to exchange energy in an efficient manner. With this design, the transfer of electricity, which tend to dissipate naturally, is concentrated in a limited space. "A laptop computer was inside a room equipped with this kind of wireless power" says Peter Fisher, a member of the MIT team, it recharges automatically, without having to be plugged. In fact, not even need to have a battery to operate inside this room "

What Do You Wear Penny Loafer With

Gonzago ROBOTS 2007 V1.1

Hello friends

Well back in college some work and projects, here are public finally completed version until GONZAGA v1.1 which depues return to his first competition with a modest victory.

PHOTOS:

These are the photos in full construction, anything related to apologize for the images are not of good quality except the last, the problems esque did not have a camera, if someone out there can donate one, I'd be very grateful (jajaj) joke (the donation).

Chassis Meccano parts

Support engines

Top View

Digital Stage

Power Stage

sensory stage

This last picture we see him with his brother the "shop" to discuss your birth depues which certainly did not think that something would be born in 2 weeks .. .. hahaha.

AGENDA 1

This program works with 3 sensors, their movements esque characteristics we are for closed tracks without angles straight.

'*************************************
*************************** '* Name: *
Gonzago V1.1' * Author: nestor garcia alejandro ccencho
* '* Notice:
axgt8@hotmail.com * '*: Universidad Nacional San Luis Gonzaga de Ica, Peru *
' * Date: 26/04/2007 *
'* Version: 1.1 *
' * Notes: with 3 lines Follower
sensors * * * '*: *
'*************************************** *************************

TRISA = $ FF;
configuration entries PORTA TRISB = $ 00;
configuration outputs PORTB PORTB = $ 00; with zeros assigned to PortB

N VAR BYTE SYMBOL SYMBOL NDSS = PORTA.3
SCEN = SYMBOL
PORTA.2 SIZQ = PORTA.1

HOME:

N = SIZQ * SCEN * 4 + 2 + NDSS;
convert to decimal
SELECT CASE 0 CASE N

PORTB =% 00110101 ; Left turn 360 º

ONE: CASE 1

PORTB =% 00110000; right turn


goto GOTO HOME ONE TWO
: CASE 2

; advances

PORTB =% 00101101 goto DOS GOTO HOME

THREE: CASE 3

PORTB =% 00101000; right turn

goto GOTO START THREE FOUR

:

CASE 4

PORTB =% 00000101; left turn goto HOME

GOTO FOUR FIVE: CASE 5

PORTB =% 00101101; advances

goto GOTO FIVE HOME

SIX: CASE

6
PORTB =% 00000101;
Left turns HOME
goto GOTO SIX SEVEN

:

CASE 7 PORTB =% 00101101; advances

CASE ELSE END: HOME goto



GOTO END GOTO END SELECT
END HOME

PROGRAM 2

This program is one that was used in the Americas contest Robots 2007, which was to follow the path on a black background white poster boards.

'******************************************** ********************
'* Name: Gonzago
V1.1 *' * Author: nestor garcia alejandro ccencho
* '* Notice:
axgt8@hotmail.com *' *: Universidad Nacional San Luis Gonzaga de Ica, Peru *
'* Date:
26/04/2007 * '* Version: 1.1 *
' * Notes: Follower of lines with 5 sensors
* '*: white and black background line *
'************* ************************************************** *

TRISA = $ FF TRISB = $ 00 = $ 00 PORTB

M VAR BYTE N VAR BYTE

L1 = PORTA.0
SYMBOL SYMBOL SYMBOL SIZQ = PORTA.1
SCEN = PORTA.2
PORTA.3
SYMBOL SYMBOL NDSS = L2 = PORTA.4

HOME:

N = SIZQ * SCEN * 4 + 2 + NDSS
M = 2 * L1 + L2 M


SELECT CASE CASE 0

PORTB =% 00000101; Left
GOTO HOME

Option1: CASE 1

PORTB.0 = 1

PORTB.2 PORTB.1 = 0 = 1 = 0
PORTB.3
PORTB.4 = 1
pwm
PORTB.5, 254.1
GOTO GOTO HOME
Option1 Option2

: CASE 2

PORTB.1 PORTB.0 = 0 = 1 = 1
PORTB.2

PORTB.3 = 1
PORTB 4 = 0

PORTB.5 pwm, 254.1


PORTB.1 PORTB.0 = 0 = 1

PORTB.3 PORTB.2 = 1 = 1 = 0
PORTB.4

PORTB.5 pwm, 254.1

GOTO GOTO HOME
OPTION2

OPTION3:

CASE 3


GOTO GOTO MAIN HOME
GOTO OPTION3


FINAL CASE ELSE: HOME goto



GOTO FINAL END SELECT GOTO


MAIN HOME: SELECT CASE N





case 0 PORTB =% 00101101

ONE: CASE 1

PORTB

=% 00000101 goto GOTO ONE HOME

TWO: CASE 2

PORTB =% 00101101 goto

GOTO DOS
HOME THREE: CASE 3

PORTB =% 00000101 HOME goto



GOTO FOUR THREE: CASE 4



PORTB =% 00101000 goto GOTO HOME

FIVE FOUR: CASE 5



PORTB =% 00101101 goto GOTO HOME

SIX FIVE: CASE 6

PORTB =% 00101000 goto


HOME
GOTO SIX SEVEN: CASE 7


PORTB =% 00110101


END CASE ELSE: HOME goto



GOTO END GOTO END SELECT

END HOME

Well, I hope everyone is satisfied with this, is that many have been asking about the program, and as you see already, so Use it and escribenla any questions or comments on the blog.

TO THE OTHER, I hope to receive your comments, so I know if the subject interested them or not.

Good Games Like Poptropica.com

AMERICA ULTIMATE TECHNOLOGY

Hi

depues Well folks a while back, this time to inform you that was the event of robot that performs the Peruvian University of the Americas.

delegations were to get started OF MEXICO, ECUADOR, COLOMBIA AND PERU.

For Peru were the universities:

Universidad Nacional Federico Villareal - UNFV

National University of Engineering - UNI

Universidad Nacional San Luis Gonzaga de Ica - UNICA

University Nacional Mayor de San Marcos - UNMS

Universidad Tecnologica del Peru - UTP

Universidad Privada Antenor Orrego - UPAO (Trujillo)

Peruans University of the Americas

were 3 categories which were: Followers of the line, Guarbots and Demonstration.

The jury consisted of ROBOTS PERU Jorge Valerio, a representative of Mexico and a representative of Ecuador.

apertuto event with dancing is typical of our Peru:

After you get started dancing everything we expected and my group too, for he who speaks and 3 closest friends, all from the UNICA (Universidad Nacional San Luis Gonzaga de Ica), participated in the categotia follower of lines with "Gonzago V1.1" and "Single."

"Gonzaga" Ccencho (YO_el red), Noah (the black), Enrique (the blue)

and get started with the Colombians, the picture we see on college ING.Carlos Bolivarina of Bucaranga-Colombia.

We before giving the results of the category lines .... suspense fans.

Hours passed and get the momennto to give the results and the Universidad Nacional San Luis Gonzaga de Ica took first place with the robot "Gonzago V1 .1 "100% doing a tour in a time of 27.36 seconds approx.

The awards ceremony

Here a picture with the legs of the UTP, UNFV, UNI and we ofcourse.

Gonzaga (right) and the only (left)

Soon we'll post the videos of the event ..... Well

to the other ..

21st Birthday Verses For Cards

CIRCUITS, VIDEOS, AND MORE TECHNOLOGY

Hello everyone

Well folks here I'm back again, absent for a while but here again ...
While few have voted in the poll that I put at least abide by all and waiting for others to enter the blog to give their vote.

CIRCUITS

1. CONTROL OF FILLING OF A TANK.

Well this circuit is about controlling the filling of a tank or cistern. His 3 sensors allow it, calibrate the filling and warn if there is a leak and even alert you if a sensor is failing.




This is the table for case:

circuit, the table and the program already compiled (Tanque.hex), which can be downloaded from the link my Shared .... Click here .
Just wait a second to look the word Download file and give it click.

2.Control SPEED OF A MOTOR DC (PWM).

This circuit allows the speed control of a DC motor, feeding "V" depending on the engine can be used, it is noteworthy that larger engines should be taken into account current, voltage, power , etc.

In particular, this circuit is used for smaller engines.
If you want to download the track .... Click here

VIDEOS

a New Transformers Movie set to hit theaters in the U.S. on the Fourth of July, but unfortunately will not be released in Japan until early August. But we found a short video review (see below) by Gizmodo first offered the latest toys from Hasbro Optimus robot.

2. Like most of us, our friend Roberto Oschler chomping at the bit waiting for the robot dinosaur Pleo to be released by UGOBE. But, unlike the rest of us, Roberto took the bull by the horns, jumped on a plane clear across the country from Florida to Boise, Idaho, and managed to land an interview with the creative geniuses behind Pleo, and most importantly He got a lot of hands on time with the cutest little robot ever set foot on the planet. He has scheduled a full report of the trip on its Web site and shared an absolutely fantastic video clip of his adventures with Pleo (see links below).

TECHNOLOGY

pqqueño So .........?

1. If you want to design really tiny mechanical devices, like robots or something similar, first you have to locate or create microscopic motors. The traditional electromagnetic motors, led by the coils and magnets, suffer from significant physical limitations that makes it difficult to create the engines under 1 mm in diameter. Ultrasonic motors are an alternative more viable, but until recently has been extremely difficult to create less than 1 mm in diameter motors using existing ultrasonic motor technology. Anyone who appears to change from earlier this week, Seiko Instruments, headquartered in Chiba, Japan, announced an engine design of the gap with a diameter of only 0.95 millimeters (0.037 inches)

Tiny

The new engine was developed by SII and Furukawa laboratory in Tokyo University of Agriculture and Technology (Tuat). Drawing on the work done by Professor EmeritusTadashi Moriya (University Metropolitan Tokyo) and Prof. Yuji Furukawa (Tuat), the new engine production was made possible by the use of manufacturing and process technologies developed by IBS with decades of precision watch making

How it works

Leaving the engine of conventional design, the new engine uses an external ultrasonic oscillator and a wire diameter of 50 microns used as a waveguide. This makes ultrasonic waves propagate affect a stator coil at the tip of motor makes the cylindrical rotor motor rotate speed amazingly.
A real advantage of this design is that its simplicity will help facilitate further size reduction of the engine. The current design is only 0.95 mm in diameter and 3.6 mm long. You can reach rotational speeds of between 2,000 to 4,000 RPM. And, as you might expect, the torque it produces is very low - 0.2 μNm.
not going to carry out our breath waiting for an engineer to create a fully functional robot using this unique technology. And certainly tiny humanoid robots with articulated joints are further uniform Off in the distance. However, there are numerous applications for microscopic motors,


Well folks this is all for now but things will continue to rise, all ok cuidense ....

WHAT HAPPENED ....

Well folks, you may have noticed I have not been on the blog for a time, the thing that was improving at Gonzaga and was also supporting friends in exhibitions ADUNI relize for 5 days in the different locations of lime, to encourage students to consider careers in ING.

Well I hope you pass me the most before the photos and video upload it to your blog. Meanwhile
am in order to build a robot explorer with my friends to the contest for the month of September, the UNI-IEEE, which will perform at the UNI.
If there was any suggestion about it gladly receive for this project we are working.

Well the photo is mine Migo Mollepaza Jhonny, exponiedo a quadruped of 12 servos that only good that is valued around S/1500 soles, well I from appearing on other photos that will upload just have them in hand, ok .

here for more info at this address http://www.aduni.com.pe/prensa/na467.htm

post more info and also have it just upload and Gonzago v1.1 program, which is good and also concluded the photos I will show its new image, well that's what makes this week at the latest.

IEEE First National Robotics Competition

I inform you about the last event to be performed for the 11 and 12 September, which will serve as training for the real event will be in Monterrey-Mexico City on November 5,6,7.

Date: 11 and September 12, 2007

Venue: Esplanade de la FAUA National University Ingeniería.Categoría: OpenCom preparatory activity for what will be the LARC 2007 (Latin American Robotics Contest), which will be held in the city of Monterrey - Mexico on 5, 6 and 7 November 2007

The prize: ticket + travel bag to the city of Mexico to participate in the LARC 2007

Sponsors: IEEE-UNI and CEDIM


Bases:
Test description: Design a robot to solve this task efficiently and as quickly posible.El robot will start at point A in a jungle area called Veracruz, where there will be a first order in I.

The robot must pass Populated Plains area, collect the items II and III then climb the volcano Popocatepetl, where there will be a fourth and last item on the top, finally, the robot will have to be able to cross a small pool of 10 cm depth and then go back to the mainland and deposit the objects in the area established (home Moctezuma).

Scenario Description: -

Overall Dimensions:

The stage will measure 6.5m long by 1.5m anchoMaterial: the scenario with the exception of the pool area will be constructed of wood with possible discontinuities of up to + / - 2mm .- Selva

Veracruzana:
Measures: 1.5m wide and 1.5m profundidad.Color: Light Green-Plain Populated: Measurements: 1.5m wide and 0.5m long.

Color: Light Green

-Popocatepetl Volcano:
Measures: 1.5m wide and 1.5m long
Color: White

- Lake Texcoco:
Measures: 1.5m wide and 2m long and 0.15m deep .
Color: Transparent

-Tenochtitlan:

Dimensions: 1.5 km wide and 64cm long.
Color: Red Robot

Specifications: Overall dimensions

to start the Test:

Width: 30cm
Length:
30cm Height: 30cm
process underway
After testing the robot is allowed to expand and contract its mechanisms arms or cranes, provided it do it for himself after the start of prueba.Está permitted to use any tipo.Está sensors actuators allowed to use any tipo.Está permitted to use any type of processor and any trading platform or modificada.El itself must be fully autonomous robot, do not allow the use of robots controlled as remora.

objects to collect: There will be four objects that are placed as a default as shown.

Their actions are: Width: 5cm.Alto: 5cm.Largo: 5cm.Su color is Light Blue.

Qualification Criteria: The winner is the robot that scores the most points (first step) in the shortest time possible (Second step).
It has a maximum of 10 minutes to complete the test.

The robot will be entitled to 2 reboots.

Score:

Purpose I gathered: +1 point. Object II
collected: +2 points. Object III
collected: +3 points. Subject IV
collected: +4 points.

For each item delivered: +5 puntos.Penalización each reboot: -1 means object punto.Se collected when the robot is capable of carrying the object to the next stage of the stage. Example: the object I brought to the beginning of the populated plains.
The bases can be downloaded directly from the address:

http://www.ewh.ieee.org/reg/9/robotica/Reglas/Libre2007-Espanolv2.pdf
entries will be open soon!
For details, write to email: cedim@uni.edu.pe CEDIM
or call the number: 3811510




IPN DEVELOP THE PROGRAM TO IDENTIFY TWO FACES .

Among the secrets that scientists still protects the human brain, is know how on how ........ Read the news


VIDEOS OF FIRST WITH ROBOTIC NASA
Here
nasa videos ... See here


ORAL ALARM CLOCK


This watch is for people who snore are not when they are sick or hoarse (ie not for me), but if you do not have that problem Voice Interactive Alarm Clock you will work, as it responds to voice recognition, and persinalizar alarms as you like.
The voice activation is initiated by the phrase Alarm Clock that will hear the current time, the agenda of the day, night light or anything else that comes to mind, now if your need is to sleep a little nap with just pronounce Snooze will have 10 minutes or more depending on your need, a soothing nap.

LCD screen has a leg check the time, day, week and if it is am or pm. Another function that brings the remote control to turn on the tv when I set the time. Its price is $ 59.95 USD.

Via: Ouna Post http://tecnochica.com/









LAUNCH A PITCHER OF IMAGES WITH DATA ON MY CUADRENO


Riya service allows you to locate people through image patterns.
A new service called Riya offers searches through photo albums with a virtually unprecedented feature: face recognition. Thus, it is possible can? Train? the system to be recognizing the faces of the people appearing in the collection of photos of each user. As in other services, you may go to tag photos with keywords, commonly known as "tags? but also Riya are adding to others? tags? via automatic recognition the people who appear in fotografías.Para achieve the identification of a person, the system is not only based on information from his face, but other data, such as the color of the clothes used, etc.. It is estimated that the percentage of hits will be about 70%. The service can track photos both user online collections, such as hard disk itself.



The URL of the service (currently in beta) is http://riya.com/

CUCABOTS

Robots robotics workshops for school, if you want get started a robotics club school, you can get started putting together these robots, simple and inexpensive.

This site has everything a Beginners must pass to be a weapon Robots ..
can enter your website: Cucabots

THE WORLD'S SMALLEST ROBOT

Well folks if they think they have seen it all here I show the smallest robot the world.
and read it the same creator who explains about his creation.

I finished building my first robot sumo, which I believe is the first picorobot sumo, as well as the world's smallest robot today. I define as an engine robot self-powered, autonomous, with active Senseo their environment and the ability to control their movements. It has a battery, intelligent control, infrared sensors and two motors.
When reminded of a story in 2001 on a small robot from Sandia, Zak said, "Sandia's robot is the one who inspired me to get in this ... the robot is a quarter of a cubic inch, about twice the mine. "

PHOTO:

Jvc Powered Subwoofer Thm 303

VIDEOS

TOP 10 VIDEOS OF THE MONTH ...!

Well before he leaves this month Abirl, I show these videos.

1. Well this robot snake if it's interesting, but even his mechanism.

2. Robots animals is a proof that the robots can be useful, when human catastrophes.

3. Well some movie, see part I. TERMINATOR vs ROBOCOP

4. Robocop vs Terminator Part II.

5.TERMINATOR vs ROBOCOP Part III.

Well that's all for now, I will continue uploading more videos. Continue


...................



TOP 10 VIDEOS OF THE MONTH ...!

1.This video is certainly as I said in my website, which I like and introduced me to this wonderful world of robots robotica.El called "QRIO" and the SONY.

2. For fans of "Transformers" academic progress of the film that will have already gone ...!

3. This robot is called "ASIMO" and is a creation of Honda, I consider it one of the best robots in the world after "QRIO" of the SONY.

saw QRIO 4.Bueno if they do not think this one also has a friend "AIBO".

5. Beam Robots, theorem "chaos", generates life robots.

6. UNI Interview Robot Olympiad on CNN.

7. This if you run hard, but so do a better and contest May 5 in ROBOTS AMERICA 2007

Robots 8.Aca rappers.

9.Lo harder in fighting robots is here, good-natured ....!

10.This is called "Galatea" and is one of the next projects I'm working.

YAPA MORE GOOD ONE, BUT THIS IS FUNNY ........! (I think I will be a section devoted to the robots more jajaj funny ....)

¡....... Ahi les va ... enjoy it ......!

MORE VIDEOS ON MY OFFICIAL WEBSITE ROBOTICACCENCHO

APRIL

Vote to elect the Video of the month, have your comment (at the bottom) to blog and tell us what your favorita.Solo takes a few seconds. ...!.

Comment On what you think this section and tell us if you want to publish a special theme video or just ask.

1.AC Robodex 2003, has left nose if another edition of this event .. who was the star of the event? veanlo yourself.

2.This is a event that took place in Juliaca.

3.Robots of exploring Mars, NASA Mars Exploration Rovers (MER).

4.Aca I present the Humanoid Robot HR-2.

5. If we talked about Qrio "sony" Asimo, "Honda" now here is the Toyota robot.

6. Dogs also can play football.

7.Si play like we would go to the world and not cello Japan Uribe ... .. Good!

8.La gang ..¡...... Robotica these ............!

9. Here one of the categories of robotics competitions "SUMO."

10. UPB hotbed of robotics in Bucaramanga, but I think the this was in Bolivia early this year, haver if someone corrects me, grabbing a comment. Category "listening lines"

GOOD ONE MORE YAPA as usual,

¡....... Ahi les va ... enjoy it ......!

Pebbles And Bamm Bamm Cartoon

Printed

DESIGN OF PRINTED:

C hen you want to do a project of electronica simpre think give a professional finish, well we refer to printed boards, who has done a form at least with your ... Plumoncito and ....!, rule or whether to make a PCB with a program, but that's all well you design it and everything but when the hour goes wrong or not know how to spend your Bakelite.
Well there are several ways, one is with paper photographic.

in which one must pass design.

There are others who use A4 bond paper, onion paper, paper goose.

There is also another method, similar to the method of estanpado of poles, and another method that is expensive, using the elements to reveal photographs and using transparent paper osea a paper called "movie role."

Well all this will teach a method similar to the first to talk and is using the following materials.

MATERIALS:

1. couche paper of 80 grams or 90-gramos.Buneo but the 90 is more commercial.
2. A laser printer, preferably HP.
3. Your design and echo in some PCB software.
4. Adhesive Tape.
5. Iron normal home use.
6. Your acid for print.
7. an empty vessel.

PROCEDURE:

1. Have your design ready, I throw in some PCB software, well I use the Proteus ARES I used to print and also for simulations (Isis).

Proteus v6.7 download

Proteus v6.9 download

There are other programs that generate PCB (printed design) how are you:

- Eagle

-Orcad-TraxMaker

-WinCircuit

-Proteus-Ares

-PCB Wizard, among several others.

2. If you have your laser printer you must first place the rubber sheet 80 or 90 grams in the printer to print in the most shiny, then print your design on the sheet, haslo toner preferably with a strong bone more ink, which he did out perfect and more likely to get it right and vacant ...!

3. Once your design already printed on the sheet couche, it must now verify that your Bakelite is clean of any grease or dirt, if not well pass it a dish washing sponge those with nothing haslo mild detergent without damaging the board.

4. Once obtained clean plate, proceeds to put the sheet with your design couche on your Bakelite, for this cuts the sheet as you design your baqulita but leaving a little edge, "For this ..? .

to Haci is able to hold the paper with the adhesive tape by hand behind the plate.

5. Once done this and grip the paper, bakelite, proceeds to light the grill. Once the iron is hot or so not so, proceed to "Iron your Bakelite with the blade, move the iron is desir on the role that this subject by Bakelite, haslo like ironing a dress, give a little squeezing past the plate on the plate.

not do it too long as the paper burns .. How do I know you are ready ..? Well to pass the iron over the paper subject to the Bakelite notice that the lines of your design track traslucira for the role, you will notice the clues bone are seen sheet. Some lines do not notice much stronger than others but estan.Has this for 1 to 2 minutes.

6. Once already see all the tracks for the role (some more q other), proceeds to remove the plate and see that while cool, lift the paper forming air like balls, this really only occurs in areas that is not your design on the white bone.

After this see if some parts of the track have been raised, this means desir not have stuck it to bakelite, if so pass the plate again for the defective area.

7. After around and being cold plate and proceeds to put the cold water (warm preferncia, goes faster on paper), and proceeds to slowly throw your hand with water on the plate, until you feel it getting wet inside and once this comes to slowly rub with fingertips paper, and notice that it will slowdown the paper carefully haslo but fouled the tracks.

Veras the paper will slowdown and you can only track your design bone

8. A removed all the paper, correcting if you ate there a track with a marker for haslo impresos.Luego this should put your plate to the acid (ferric chloride or ferric chloride Ferric Iron or simply ask as acid to boxes in your nearest electronics store to home) in the container.

Move gently with the acid container and the plate until you feel that because acid has eaten all the copper is only the tracks of your design, preferably put the plate upside down (face design to below).

Once this removes your plate, wash with a little ring tones (those who used to wash the pots) or else pass it draft and removed all the black in your tracks (printer ink) and q really ue charge a seeming echo see this, your plate will be ready .... !

Avail now have a professional design, easy and convenient way ..

NOTE:

plate not much pressure to do this because ink on the printer you spill your design imprimistes and perhaps eventually join with other tracks and will make short, if this happens just with a knife to separate a must see after you've removed the paper with water.

If there are questions or comments hasmela know or if you want some pictures of procedimientode this method, please write a comment on the page or else write to my mail:

mailto: @ axgt8 hotmail.com,

of choice for more often in axgt8@hotmail.com

Links Author:

RoboticaCCencho